Rainbow Chanel
 
Di Autocad Kita dapat menghitung dan menampilkan area dan perimeter urutan poin atau dari setiap beberapa jenis objek.
Jika Kita perlu untuk menghitung luas gabungan lebih dari satu objek.
Kita tidak dapat menggunakan window selection atau crossing selection untuk memilih objek.
Untuk menghitung Defined Area
Kita dapat mengukur suatu daerah tertutup oleh poin yang Kita tentukan. Titik-titik harus berada di plane sejajar dengan bidang XY dari UCS.
Untuk menghitung Perimeter, atau Lingkar Obyek
Kita dapat menghitung daerah tertutup dan perimeter atau keliling lingkaran, elips, polylines, poligon, daerah, dan 3D AutoCAD.
Informasi yang ditampilkan akan berbeda sesuai dengan jenis objek yang Kita pilih:
Lingkaran. Area dan circumference ditampilkan.
Elips, polylines tertutup, poligon, kurva spline planar , dan Area dan perimeter ditampilkan.
Untuk polylines lebar, daerah ini ditentukan oleh pusat dari lebar.

Untuk menghitung luas / area objek
Dari Tools menu, pilih Inquiry. Kemudian pilih Area.
Pada baris perintah, masukkan o (Obyek).
Pilih objek.
AutoCAD menampilkan area dan perimeter objek yang dipilih.

 






Langkah langkah yang harus kita lakukan adalah :

Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: o
OFFSET
Specify offset distance or [Through] : 47.5
Select object to offset or :
Specify point on side to offset:
Select object to offset or :
Specify point on side to offset:
Select object to offset or :
Command: f
FILLET
Current settings: Mode = TRIM, Radius = 0.4000
Select first object or [Polyline/Radius/Trim/mUltiple]: r
Specify fillet radius <0.4000>: 0
Select first object or [Polyline/Radius/Trim/mUltiple]:
Select second object:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Polyline/Radius/Trim/mUltiple]:
Select second object:
Command: o
OFFSET
Specify offset distance or [Through] <47.5000>: 54.5
Select object to offset or :
Specify point on side to offset:
Select object to offset or :
Specify point on side to offset:
Select object to offset or :
Command: l
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command: _.erase 1 found